Natural gas open type generator set
Specification
Natural gas units can use different types of gas engines, such as internal combustion engines, gas turbines, etc. The most common type of natural gas unit, the internal combustion engine burns natural gas to move a piston, which in turn produces mechanical energy that drives a generator to generate electricity. Gas turbines use natural gas to generate high-temperature and high-pressure gas, which drives the turbine to rotate, and finally drives the generator to generate electricity.
Natural gas units are widely used in the fields of power industry, industrial production and heating. It not only provides reliable power supply, but also can make full use of the high-efficiency characteristics of natural gas to reduce energy waste and environmental pollution. As the demand for clean energy grows, the application prospects of natural gas units are very broad.
Requirements for Natural gas
(1) The methane content should not be lower than 95%.
(2) The natural gas temperature should be between 0-60。
(3) No impurity should be in the gas. Water in the gas should be less than 20g/Nm3.
(4) Heat value should be at least 8500kcal/m3, if less than this value, the power of the engine will be declined.
(5) Gas pressure should be 3-100KPa, if the pressure is less than 3KPa, booster fan is necessary.
(6) The gas should be dehydrated and desulfurized. Make sure that there is no liquid in the gas. H2S<200mg/Nm3.
Requirements for Natural gas
(1) The methane content should not be lower than 95%.
(2) The natural gas temperature should be between 0-60。
(3) No impurity should be in the gas. Water in the gas should be less than 20g/Nm3.
(4) Heat value should be at least 8500kcal/m3, if less than this value, the power of
(5) Gas pressure should be 3-100KPa, if the pressure is less than 3KPa, booster fan is necessary.
(6) The gas should be dehydrated and desulfurized. Make sure that there is no liquid in the gas. H2S<200mg/Nm3.
-
Phone
-
E-mail
-
Whatsapp
-
Top